; **************************************************************************** ; TRDOS386.ASM (TRDOS 386 Kernel) - v2.0.5 - keyboard.s ; ---------------------------------------------------------------------------- ; Last Update: 07/08/2022 (Previous: 12/04/2021) ; ---------------------------------------------------------------------------- ; Beginning: 17/01/2016 ; ---------------------------------------------------------------------------- ; Assembler: NASM version 2.15 (trdos386.s) ; ---------------------------------------------------------------------------- ; Turkish Rational DOS ; Operating System Project v2.0 by ERDOGAN TAN (Beginning: 04/01/2016) ; ; Derived from 'Retro UNIX 386 Kernel - v0.2.1.0' source code by Erdogan Tan ; keyboard.inc (17/10/2015) ; ; Derived from 'IBM PC-XT-286' BIOS source code (1986) ; **************************************************************************** ; Ref: Retro UNIX 386 v1.2 - keyboard.s - 11/06/2022 ; Retro UNIX 386 v1 Kernel - KEYBOARD.INC ; Last Modification: 17/10/2015 ; (Keyboard Data is in 'KYBDATA.INC') ; ; ///////// KEYBOARD FUNCTIONS (PROCEDURES) /////////////// ; 17/01/2016 (TRDOS 386 = TRDOS v2.0) ; 03/12/2014 ; 26/08/2014 ; KEYBOARD I/O ; (INT_16h - Retro UNIX 8086 v1 - U9.ASM, 30/06/2014) ;NOTE: 'k0' to 'k7' are name of OPMASK registers. ; (The reason of using '_k' labels!!!) (27/08/2014) ;NOTE: 'NOT' keyword is '~' unary operator in NASM. ; ('NOT LC_HC' --> '~LC_HC') (bit reversing operator) int16h: ; 30/06/2015 ;getc: pushfd ; 28/08/2014 push cs call KEYBOARD_IO_1 ; getc_int retn ; 24/07/2022 - TRDOS 386 v2.0.5 ;----- SHIFT STATUS _K3E: ; GET THE EXTENDED SHIFT STATUS FLAGS mov ah, [KB_FLAG_1] ; GET SYSTEM SHIFT KEY STATUS and ah, SYS_SHIFT ; MASK ALL BUT SYS KEY BIT ;mov cl, 5 ; SHIFT THEW SYSTEMKEY BIT OVER TO ;shl ah, cl ; BIT 7 POSITION shl ah, 5 mov al, [KB_FLAG_1] ; GET SYSTEM SHIFT STATES BACK and al, 01110011b ; ELIMINATE SYS SHIFT, HOLD_STATE AND INS_SHIFT or ah, al ; MERGE REMAINING BITS INTO AH mov al, [KB_FLAG_3] ; GET RIGHT CTL AND ALT and al, 00001100b ; ELIMINATE LC_E0 AND LC_E1 or ah, al ; OR THE SHIFT FLAGS TOGETHER _K3: mov al, [KB_FLAG] ; GET THE SHIFT STATUS FLAGS ; 24/07/2022 jmp short _KIO_EXIT ; RETURN TO CALLER getc_int: ; 28/02/2015 ; 03/12/2014 (derivation from pc-xt-286 bios source code -1986-, ; instead of pc-at bios - 1985-) ; 28/08/2014 (_k1d) ; 30/06/2014 ; 03/03/2014 ; 28/02/2014 ; Derived from "KEYBOARD_IO_1" procedure of IBM "pc-xt-286" ; rombios source code (21/04/1986) ; 'keybd.asm', INT 16H, KEYBOARD_IO ; ; KYBD --- 03/06/86 KEYBOARD BIOS ; ;--- INT 16 H ----------------------------------------------------------------- ; KEYBOARD I/O : ; THESE ROUTINES PROVIDE READ KEYBOARD SUPPORT : ; INPUT : ; (AH)= 00H READ THE NEXT ASCII CHARACTER ENTERED FROM THE KEYBOARD, : ; RETURN THE RESULT IN (AL), SCAN CODE IN (AH). : ; THIS IS THE COMPATIBLE READ INTERFACE, EQUIVALENT TO THE : ; STANDARD PC OR PCAT KEYBOARD : ;-----------------------------------------------------------------------------: ; (AH)= 01H SET THE ZERO FLAG TO INDICATE IF AN ASCII CHARACTER IS : ; AVAILABLE TO BE READ FROM THE KEYBOARD BUFFER. : ; (ZF)= 1 -- NO CODE AVAILABLE : ; (ZF)= 0 -- CODE IS AVAILABLE (AX)= CHARACTER : ; IF (ZF)= 0, THE NEXT CHARACTER IN THE BUFFER TO BE READ IS : ; IN (AX), AND THE ENTRY REMAINS IN THE BUFFER. : ; THIS WILL RETURN ONLY PC/PCAT KEYBOARD COMPATIBLE CODES : ;-----------------------------------------------------------------------------: ; (AH)= 02H RETURN THE CURRENT SHIFT STATUS IN AL REGISTER : ; THE BIT SETTINGS FOR THIS CODE ARE INDICATED IN THE : ; EQUATES FOR @KB_FLAG : ;-----------------------------------------------------------------------------: ; (AH)= 03H SET TYPAMATIC RATE AND DELAY : ; (AL) = 05H : ; (BL) = TYPAMATIC RATE (BITS 5 - 7 MUST BE RESET TO 0) : ; : ; REGISTER RATE REGISTER RATE : ; VALUE SELECTED VALUE SELECTED : ; -------------------------------------------- : ; 00H 30.0 10H 7.5 : ; 01H 26.7 11H 6.7 : ; 02H 24.0 12H 6.0 : ; 03H 21.8 13H 5.5 : ; 04H 20.0 14H 5.0 : ; 05H 18.5 15H 4.6 : ; 06H 17.1 16H 4.3 : ; 07H 16.0 17H 4.0 : ; 08H 15.0 18H 3.7 : ; 09H 13.3 19H 3.3 : ; 0AH 12.0 1AH 3.0 : ; 0BH 10.9 1BH 2.7 : ; 0CH 10.0 1CH 2.5 : ; 0DH 9.2 1DH 2.3 : ; 0EH 8.6 1EH 2.1 : ; 0FH 8.0 1FH 2.0 : ; : ; (BH) = TYPAMATIC DELAY (BITS 2 - 7 MUST BE RESET TO 0) : ; : ; REGISTER DELAY : ; VALUE VALUE : ; ------------------ : ; 00H 250 ms : ; 01H 500 ms : ; 02H 750 ms : ; 03H 1000 ms : ;-----------------------------------------------------------------------------: ; (AH)= 05H PLACE ASCII CHARACTER/SCAN CODE COMBINATION IN KEYBOARD : ; BUFFER AS IF STRUCK FROM KEYBOARD : ; ENTRY: (CL) = ASCII CHARACTER : ; (CH) = SCAN CODE : ; EXIT: (AH) = 00H = SUCCESSFUL OPERATION : ; (AL) = 01H = UNSUCCESSFUL - BUFFER FULL : ; FLAGS: CARRY IF ERROR : ;-----------------------------------------------------------------------------: ; (AH)= 10H EXTENDED READ INTERFACE FOR THE ENHANCED KEYBOARD, : ; OTHERWISE SAME AS FUNCTION AH=0 : ;-----------------------------------------------------------------------------: ; (AH)= 11H EXTENDED ASCII STATUS FOR THE ENHANCED KEYBOARD, : ; OTHERWISE SAME AS FUNCTION AH=1 : ;-----------------------------------------------------------------------------: ; (AH)= 12H RETURN THE EXTENDED SHIFT STATUS IN AX REGISTER : ; AL = BITS FROM KB_FLAG, AH = BITS FOR LEFT AND RIGHT : ; CTL AND ALT KEYS FROM KB_FLAG_1 AND KB_FLAG_3 : ; OUTPUT : ; AS NOTED ABOVE, ONLY (AX) AND FLAGS CHANGED : ; ALL REGISTERS RETAINED : ;------------------------------------------------------------------------------ ; 07/08/2022 ; 24/07/2022 - TRDOS 386 v2.0.5 ; 12/04/2021 - TRDOS 386 v2.0.3 (32 bit push/pop) ; 15/01/2017 ; 14/01/2017 ; 02/01/2017 ; 29/05/2016 ; 29/04/2016 - TRDOS 386 (TRDOS v2.0) int32h: ; Keyboard BIOS KEYBOARD_IO_1: ;sti ; INTERRUPTS BACK ON ; 29/05/2016 and byte [esp+8], 10111110b ; clear zero flag and cary flag ; push ds ; SAVE CURRENT DS push ebx ; SAVE BX TEMPORARILY ;push ecx ; SAVE CX TEMPORARILY mov bx, KDATA mov ds, bx ; PUT SEGMENT VALUE OF DATA AREA INTO DS ; 14/01/2017 mov ebx, [esp] ;; 15/01/2017 ; 02/01/2017 ;;mov byte [intflg], 32h ; keyboard interrupt sti ; or ah, ah ; CHECK FOR (AH)= 00H jz short _K1 ; ASCII_READ dec ah ; CHECK FOR (AH)= 01H jz short _K2 ; ASCII_STATUS dec ah ; CHECK FOR (AH)= 02H jz short _K3 ; SHIFT STATUS dec ah ; CHECK FOR (AH)= 03H jz short _K300 ; SET TYPAMATIC RATE/DELAY sub ah, 2 ; CHECK FOR (AH)= 05H ;jz short _K500 ; KEYBOARD WRITE ; 07/08/2022 jnz short _KIO1 jmp _K500 _KIO1: sub ah, 11 ; AH = 10H jz short _K1E ; EXTENDED ASCII READ dec ah ; CHECK FOR (AH)= 11H jz short _K2E ; EXTENDED_ASCII_STATUS dec ah ; CHECK FOR (AH)= 12H jz short _K3E ; EXTENDED_SHIFT_STATUS _KIO_EXIT: ; 02/01/2017 cli ;;mov byte [intflg], 0 ;; 15/01/2017 ; ;pop ecx ; RECOVER REGISTER pop ebx ; RECOVER REGISTER pop ds ; RECOVER SEGMENT iretd ; INVALID COMMAND, EXIT ; 24/07/2022 ; ; ;----- SHIFT STATUS ;_K3E: ; GET THE EXTENDED SHIFT STATUS FLAGS ; mov ah, [KB_FLAG_1] ; GET SYSTEM SHIFT KEY STATUS ; and ah, SYS_SHIFT ; MASK ALL BUT SYS KEY BIT ; ;mov cl, 5 ; SHIFT THEW SYSTEMKEY BIT OVER TO ; ;shl ah, cl ; BIT 7 POSITION ; shl ah, 5 ; mov al, [KB_FLAG_1] ; GET SYSTEM SHIFT STATES BACK ; and al, 01110011b ; ELIMINATE SYS SHIFT, HOLD_STATE AND INS_SHIFT ; or ah, al ; MERGE REMAINING BITS INTO AH ; mov al, [KB_FLAG_3] ; GET RIGHT CTL AND ALT ; and al, 00001100b ; ELIMINATE LC_E0 AND LC_E1 ; or ah, al ; OR THE SHIFT FLAGS TOGETHER ;_K3: ; mov al, [KB_FLAG] ; GET THE SHIFT STATUS FLAGS ; ; 24/07/2022 ; jmp short _KIO_EXIT ; RETURN TO CALLER ;----- ASCII CHARACTER _K1E: call _K1S ; GET A CHARACTER FROM THE BUFFER (EXTENDED) call _KIO_E_XLAT ; ROUTINE TO XLATE FOR EXTENDED CALLS jmp short _KIO_EXIT ; GIVE IT TO THE CALLER _K1: call _K1S ; GET A CHARACTER FROM THE BUFFER call _KIO_S_XLAT ; ROUTINE TO XLATE FOR STANDARD CALLS jc short _K1 ; CARRY SET MEANS TROW CODE AWAY _K1A: jmp short _KIO_EXIT ; RETURN TO CALLER ;----- ASCII STATUS _K2E: call _K2S ; TEST FOR CHARACTER IN BUFFER (EXTENDED) jz short _K2B ; RETURN IF BUFFER EMPTY pushf ; SAVE ZF FROM TEST call _KIO_E_XLAT ; ROUTINE TO XLATE FOR EXTENDED CALLS jmp short _K2A ; GIVE IT TO THE CALLER _K2: call _K2S ; TEST FOR CHARACTER IN BUFFER jz short _K2B ; RETURN IF BUFFER EMPTY pushf ; SAVE ZF FROM TEST call _KIO_S_XLAT ; ROUTINE TO XLATE FOR STANDARD CALLS jnc short _K2A ; CARRY CLEAR MEANS PASS VALID CODE popf ; INVALID CODE FOR THIS TYPE OF CALL call _K1S ; THROW THE CHARACTER AWAY jmp short _K2 ; GO LOOK FOR NEXT CHAR, IF ANY _K2A: popf ; RESTORE ZF FROM TEST _K2B: ; 02/01/2017 cli ;; mov byte [intflg], 0 ;; 15/01/2017 ; ;pop ecx ; RECOVER REGISTER pop ebx ; RECOVER REGISTER pop ds ; RECOVER SEGMENT ; (*) 29/05/2016 ; (*) retf 4 ; THROW AWAY (e)FLAGS jc short _k2d jnz short _k2c or byte [esp+8], 01000000b ; set zero flag bit of eflags register _k2c: iretd _k2d: ; 29/05/2016 -set carry flag on stack- ; [esp] = EIP ; [esp+4] = CS ; [esp+8] = E-FLAGS or byte [esp+8], 1 ; set carry bit of eflags register ; [esp+12] = ESP (user) ; [esp+16] = SS (User) iretd ; (*) 29/05/2016 - 'retf 4' intruction causes to stack fault ; (OUTER-PRIVILEGE-LEVEL) ; INTEL 80386 PROGRAMMER'S REFERENCE MANUAL 1986 ; // RETF instruction: ; ; IF OperandMode=32 THEN ; Load CS:EIP from stack; ; Set CS RPL to CPL; ; Increment ESP by 8 plus the immediate offset if it exists; ; Load SS:ESP from stack; ; ELSE (* OperandMode=16 *) ; Load CS:IP from stack; ; Set CS RPL to CPL; ; Increment SP by 4 plus the immediate offset if it exists; ; Load SS:SP from stack; ; FI; ; ; // ; 24/07/2022 ;----- SET TYPAMATIC RATE AND DELAY _K300: cmp al, 5 ; CORRECT FUNCTION CALL? jne short _KIO_EXIT ; NO, RETURN test bl, 0E0h ; TEST FOR OUT-OF-RANGE RATE jnz short _KIO_EXIT ; RETURN IF SO test bh, 0FCh ; TEST FOR OUT-OF-RANGE DELAY jnz short _KIO_EXIT ; RETURN IF SO mov al, KB_TYPA_RD ; COMMAND FOR TYPAMATIC RATE/DELAY call SND_DATA ; SEND TO KEYBOARD ;mov cx, 5 ; SHIFT COUNT ;shl bh, cl ; SHIFT DELAY OVER shl bh, 5 mov al, bl ; PUT IN RATE or al, bh ; AND DELAY call SND_DATA ; SEND TO KEYBOARD jmp _KIO_EXIT ; RETURN TO CALLER ;----- WRITE TO KEYBOARD BUFFER _K500: push esi ; SAVE SI (esi) cli ; mov ebx, [BUFFER_TAIL] ; GET THE 'IN TO' POINTER TO THE BUFFER mov esi, ebx ; SAVE A COPY IN CASE BUFFER NOT FULL call _K4 ; BUMP THE POINTER TO SEE IF BUFFER IS FULL cmp ebx, [BUFFER_HEAD] ; WILL THE BUFFER OVERRUN IF WE STORE THIS? je short _K502 ; YES - INFORM CALLER OF ERROR mov [esi], cx ; NO - PUT ASCII/SCAN CODE INTO BUFFER mov [BUFFER_TAIL], ebx ; ADJUST 'IN TO' POINTER TO REFLECT CHANGE sub al, al ; TELL CALLER THAT OPERATION WAS SUCCESSFUL jmp short _K504 ; SUB INSTRUCTION ALSO RESETS CARRY FLAG _K502: mov al, 01h ; BUFFER FULL INDICATION _K504: sti pop esi ; RECOVER SI (esi) jmp _KIO_EXIT ; RETURN TO CALLER WITH STATUS IN AL ;----- READ THE KEY TO FIGURE OUT WHAT TO DO ----- _K1S: cli ; 03/12/2014 mov ebx, [BUFFER_HEAD] ; GET POINTER TO HEAD OF BUFFER cmp ebx, [BUFFER_TAIL] ; TEST END OF BUFFER ;jne short _K1U ; IF ANYTHING IN BUFFER SKIP INTERRUPT jne short _k1x ; 03/12/2014 ; ; 03/12/2014 ; 28/08/2014 ; PERFORM OTHER FUNCTION ?? here ! ;; MOV AX, 9002h ; MOVE IN WAIT CODE & TYPE ;; INT 15H ; PERFORM OTHER FUNCTION _K1T: ; ASCII READ sti ; INTERRUPTS BACK ON DURING LOOP nop ; ALLOW AN INTERRUPT TO OCCUR _K1U: cli ; INTERRUPTS BACK OFF mov ebx, [BUFFER_HEAD] ; GET POINTER TO HEAD OF BUFFER cmp ebx, [BUFFER_TAIL] ; TEST END OF BUFFER _k1x: push ebx ; SAVE ADDRESS pushf ; SAVE FLAGS call MAKE_LED ; GO GET MODE INDICATOR DATA BYTE mov bl, [KB_FLAG_2] ; GET PREVIOUS BITS xor bl, al ; SEE IF ANY DIFFERENT and bl, 07h ; KB_LEDS ; ISOLATE INDICATOR BITS jz short _K1V ; IF NO CHANGE BYPASS UPDATE call SND_LED1 cli ; DISABLE INTERRUPTS _K1V: popf ; RESTORE FLAGS pop ebx ; RESTORE ADDRESS je short _K1T ; LOOP UNTIL SOMETHING IN BUFFER ; mov ax, [ebx] ; GET SCAN CODE AND ASCII CODE call _K4 ; MOVE POINTER TO NEXT POSITION mov [BUFFER_HEAD], ebx ; STORE VALUE IN VARIABLE retn ; RETURN ;----- READ THE KEY TO SEE IF ONE IS PRESENT ----- _K2S: cli ; INTERRUPTS OFF mov ebx, [BUFFER_HEAD] ; GET HEAD POINTER cmp ebx, [BUFFER_TAIL] ; IF EQUAL (Z=1) THEN NOTHING THERE mov ax, [ebx] pushf ; SAVE FLAGS ;push ax ; SAVE CODE ; 12/04/2021 push eax call MAKE_LED ; GO GET MODE INDICATOR DATA BYTE mov bl, [KB_FLAG_2] ; GET PREVIOUS BITS xor bl, al ; SEE IF ANY DIFFERENT and bl, 07h ; KB_LEDS ; ISOLATE INDICATOR BITS jz short _K2T ; IF NO CHANGE BYPASS UPDATE call SND_LED ; GO TURN ON MODE INDICATORS _K2T: ;pop ax ; RESTORE CODE ; 12/04/2021 pop eax popf ; RESTORE FLAGS sti ; INTERRUPTS BACK ON retn ; RETURN ;----- ROUTINE TO TRANSLATE SCAN CODE PAIRS FOR EXTENDED CALLS ----- _KIO_E_XLAT: cmp al, 0F0h ; IS IT ONE OF THE FILL-INs? jne short _KIO_E_RET ; NO, PASS IT ON or ah, ah ; AH = 0 IS SPECIAL CASE jz short _KIO_E_RET ; PASS THIS ON UNCHANGED xor al, al ; OTHERWISE SET AL = 0 _KIO_E_RET: retn ; GO BACK ;----- ROUTINE TO TRANSLATE SCAN CODE PAIRS FOR STANDARD CALLS ----- _KIO_S_XLAT: cmp ah, 0E0h ; IS IT KEYPAD ENTER OR / ? jne short _KIO_S2 ; NO, CONTINUE cmp al, 0Dh ; KEYPAD ENTER CODE? je short _KIO_S1 ; YES, MASSAGE A BIT cmp al, 0Ah ; CTRL KEYPAD ENTER CODE? je short _KIO_S1 ; YES, MASSAGE THE SAME mov ah, 35h ; NO, MUST BE KEYPAD / _kio_ret: ; 03/12/2014 clc retn ;jmp short _KIO_USE ; GIVE TO CALLER _KIO_S1: mov ah, 1Ch ; CONVERT TO COMPATIBLE OUTPUT ;jmp short _KIO_USE ; GIVE TO CALLER retn _KIO_S2: cmp ah, 84h ; IS IT ONE OF EXTENDED ONES? ja short _KIO_DIS ; YES, THROW AWAY AND GET ANOTHER CHAR cmp al, 0F0h ; IS IT ONE OF THE FILL-INs? jne short _KIO_S3 ; NO, TRY LAST TEST or ah, ah ; AH = 0 IS SPECIAL CASE jz short _KIO_USE ; PASS THIS ON UNCHANGED jmp short _KIO_DIS ; THROW AWAY THE REST _KIO_S3: cmp al, 0E0h ; IS IT AN EXTENSION OF A PREVIOUS ONE? ;jne short _KIO_USE ; NO, MUST BE A STANDARD CODE jne short _kio_ret or ah, ah ; AH = 0 IS SPECIAL CASE jz short _KIO_USE ; JUMP IF AH = 0 xor al, al ; CONVERT TO COMPATIBLE OUTPUT ;jmp short _KIO_USE ; PASS IT ON TO CALLER _KIO_USE: ;clc ; CLEAR CARRY TO INDICATE GOOD CODE retn ; RETURN _KIO_DIS: stc ; SET CARRY TO INDICATE DISCARD CODE retn ; RETURN ;----- INCREMENT BUFFER POINTER ROUTINE ----- _K4: inc ebx inc ebx ; MOVE TO NEXT WORD IN LIST cmp ebx, [BUFFER_END] ; AT END OF BUFFER? ;jne short _K5 ; NO, CONTINUE jb short _K5 mov ebx, [BUFFER_START] ; YES, RESET TO BUFFER BEGINNING _K5: retn ; 20/02/2015 ; 05/12/2014 ; 26/08/2014 ; KEYBOARD (HARDWARE) INTERRUPT - IRQ LEVEL 1 ; (INT_09h - Retro UNIX 8086 v1 - U9.ASM, 07/03/2014) ; ; Derived from "KB_INT_1" procedure of IBM "pc-at" ; rombios source code (06/10/1985) ; 'keybd.asm', HARDWARE INT 09h - (IRQ Level 1) ; EQUATES (IBM PC-XT-286 BIOS, 1986, 'POSQEQU.INC') ;--------- 8042 COMMANDS ------------------------------------------------------- ENA_KBD equ 0AEh ; ENABLE KEYBOARD COMMAND DIS_KBD equ 0ADh ; DISABLE KEYBOARD COMMAND SHUT_CMD equ 0FEh ; CAUSE A SHUTDOWN COMMAND ;--------- 8042 KEYBOARD INTERFACE AND DIAGNOSTIC CONTROL REGISTERS ------------ STATUS_PORT equ 064h ; 8042 STATUS PORT INPT_BUF_FULL equ 00000010b ; 1 = +INPUT BUFFER FULL PORT_A equ 060h ; 8042 KEYBOARD SCAN CODE/CONTROL PORT ;---------- 8042 KEYBOARD RESPONSE --------------------------------------------- KB_ACK equ 0FAh ; ACKNOWLEDGE PROM TRANSMISSION KB_RESEND equ 0FEh ; RESEND REQUEST KB_OVER_RUN equ 0FFh ; OVER RUN SCAN CODE ;---------- KEYBOARD/LED COMMANDS ---------------------------------------------- KB_ENABLE equ 0F4h ; KEYBOARD ENABLE LED_CMD equ 0EDh ; LED WRITE COMMAND KB_TYPA_RD equ 0F3h ; TYPAMATIC RATE/DELAY COMMAND ;---------- KEYBOARD SCAN CODES ------------------------------------------------ NUM_KEY equ 69 ; SCAN CODE FOR NUMBER LOCK KEY SCROLL_KEY equ 70 ; SCAN CODE FOR SCROLL LOCK KEY ALT_KEY equ 56 ; SCAN CODE FOR ALTERNATE SHIFT KEY CTL_KEY equ 29 ; SCAN CODE FOR CONTROL KEY CAPS_KEY equ 58 ; SCAN CODE FOR SHIFT LOCK KEY DEL_KEY equ 83 ; SCAN CODE FOR DELETE KEY INS_KEY equ 82 ; SCAN CODE FOR INSERT KEY LEFT_KEY equ 42 ; SCAN CODE FOR LEFT SHIFT RIGHT_KEY equ 54 ; SCAN CODE FOR RIGHT SHIFT SYS_KEY equ 84 ; SCAN CODE FOR SYSTEM KEY ;---------- ENHANCED KEYBOARD SCAN CODES --------------------------------------- ID_1 equ 0ABh ; 1ST ID CHARACTER FOR KBX ID_2 equ 041h ; 2ND ID CHARACTER FOR KBX ID_2A equ 054h ; ALTERNATE 2ND ID CHARACTER FOR KBX F11_M equ 87 ; F11 KEY MAKE F12_M equ 88 ; F12 KEY MAKE MC_E0 equ 224 ; GENERAL MARKER CODE MC_E1 equ 225 ; PAUSE KEY MARKER CODE ;---------- FLAG EQUATES WITHIN @KB_FLAG---------------------------------------- RIGHT_SHIFT equ 00000001b ; RIGHT SHIFT KEY DEPRESSED LEFT_SHIFT equ 00000010b ; LEFT SHIFT KEY DEPRESSED CTL_SHIFT equ 00000100b ; CONTROL SHIFT KEY DEPRESSED ALT_SHIFT equ 00001000b ; ALTERNATE SHIFT KEY DEPRESSED SCROLL_STATE equ 00010000b ; SCROLL LOCK STATE IS ACTIVE NUM_STATE equ 00100000b ; NUM LOCK STATE IS ACTIVE CAPS_STATE equ 01000000b ; CAPS LOCK STATE IS ACTIVE INS_STATE equ 10000000b ; INSERT STATE IS ACTIVE ;---------- FLAG EQUATES WITHIN @KB_FLAG_1 ------------------------------------- L_CTL_SHIFT equ 00000001b ; LEFT CTL KEY DOWN L_ALT_SHIFT equ 00000010b ; LEFT ALT KEY DOWN SYS_SHIFT equ 00000100b ; SYSTEM KEY DEPRESSED AND HELD HOLD_STATE equ 00001000b ; SUSPEND KEY HAS BEEN TOGGLED SCROLL_SHIFT equ 00010000b ; SCROLL LOCK KEY IS DEPRESSED NUM_SHIFT equ 00100000b ; NUM LOCK KEY IS DEPRESSED CAPS_SHIFT equ 01000000b ; CAPS LOCK KEY IS DEPRE55ED INS_SHIFT equ 10000000b ; INSERT KEY IS DEPRESSED ;---------- FLAGS EQUATES WITHIN @KB_FLAG_2 ----------------------------------- KB_LEDS equ 00000111b ; KEYBOARD LED STATE BITS ; equ 00000001b ; SCROLL LOCK INDICATOR ; equ 00000010b ; NUM LOCK INDICATOR ; equ 00000100b ; CAPS LOCK INDICATOR ; equ 00001000b ; RESERVED (MUST BE ZERO) KB_FA equ 00010000b ; ACKNOWLEDGMENT RECEIVED KB_FE equ 00100000b ; RESEND RECEIVED FLAG KB_PR_LED equ 01000000b ; MODE INDICATOR UPDATE KB_ERR equ 10000000b ; KEYBOARD TRANSMIT ERROR FLAG ;----------- FLAGS EQUATES WITHIN @KB_FLAG_3 ----------------------------------- LC_E1 equ 00000001b ; LAST CODE WAS THE E1 HIDDEN CODE LC_E0 equ 00000010b ; LAST CODE WAS THE E0 HIDDEN CODE R_CTL_SHIFT equ 00000100b ; RIGHT CTL KEY DOWN R_ALT_SHIFT equ 00001000b ; RIGHT ALT KEY DOWN GRAPH_ON equ 00001000b ; ALT GRAPHICS KEY DOWN (WT ONLY) KBX equ 00010000b ; ENHANCED KEYBOARD INSTALLED SET_NUM_LK equ 00100000b ; FORCE NUM LOCK IF READ ID AND KBX LC_AB equ 01000000b ; LAST CHARACTER WAS FIRST ID CHARACTER RD_ID equ 10000000b ; DOING A READ ID (MUST BE BIT0) ; ;----------- INTERRUPT EQUATES ------------------------------------------------- EOI equ 020h ; END OF INTERRUPT COMMAND TO 8259 INTA00 equ 020h ; 8259 PORT kb_int: ; 24/07/2022 - TRDOS 386 v2.0.5 ; 12/04/2021 - TRDOS 386 v2.0.3 (32 bit push/pop) ; 17/10/2015 ('ctrlbrk') ; 05/12/2014 ; 04/12/2014 (derived from pc-xt-286 bios source code -1986-) ; 26/08/2014 ; ; 03/06/86 KEYBOARD BIOS ; ;--- HARDWARE INT 09H -- (IRQ LEVEL 1) ------------------------------------------ ; ; ; KEYBOARD INTERRUPT ROUTINE ; ; ; ;-------------------------------------------------------------------------------- KB_INT_1: sti ; ENABLE INTERRUPTS ;push ebp push eax push ebx push ecx push edx push esi push edi push ds push es cld ; FORWARD DIRECTION mov ax, KDATA mov ds, ax mov es, ax ; ;----- WAIT FOR KEYBOARD DISABLE COMMAND TO BE ACCEPTED mov al, DIS_KBD ; DISABLE THE KEYBOARD COMMAND call SHIP_IT ; EXECUTE DISABLE cli ; DISABLE INTERRUPTS mov ecx, 10000h ; SET MAXIMUM TIMEOUT KB_INT_01: in al, STATUS_PORT ; READ ADAPTER STATUS test al, INPT_BUF_FULL ; CHECK INPUT BUFFER FULL STATUS BIT loopnz KB_INT_01 ; WAIT FOR COMMAND TO BE ACCEPTED ; ;----- READ CHARACTER FROM KEYBOARD INTERFACE in al, PORT_A ; READ IN THE CHARACTER ; ;----- SYSTEM HOOK INT 15H - FUNCTION 4FH (ON HARDWARE INT LEVEL 9H) ;mov ah, 04Fh ; SYSTEM INTERCEPT - KEY CODE FUNCTION ;stc ; SET CY=1 (IN CASE OF IRET) ;int 15h ; CASETTE CALL (AL)=KEY SCAN CODE ; ; RETURNS CY=1 FOR INVALID FUNCTION ;jc KB_INT_02 ; CONTINUE IF CARRY FLAG SET ((AL)=CODE) ;jmp K26 ; EXIT IF SYSTEM HANDLES SCAN CODE ; ; EXÝT HANDLES HARDWARE EOI AND ENABLE ; ;----- CHECK FOR A RESEND COMMAND TO KEYBOARD KB_INT_02: ; (AL)= SCAN CODE sti ; ENABLE INTERRUPTS AGAIN cmp al, KB_RESEND ; IS THE INPUT A RESEND je short KB_INT_4 ; GO IF RESEND ; ;----- CHECK FOR RESPONSE TO A COMMAND TO KEYBOARD cmp al, KB_ACK ; IS THE INPUT AN ACKNOWLEDGE jne short KB_INT_2 ; GO IF NOT ; ;----- A COMMAND TO THE KEYBOARD WAS ISSUED cli ; DISABLE INTERRUPTS or byte [KB_FLAG_2], KB_FA ; INDICATE ACK RECEIVED ;jmp K26 ; RETURN IF NOT ACK RETURNED FOR DATA) ; 12/04/2021 jmp short ID_EX ; K26 ; ;----- RESEND THE LAST BYTE KB_INT_4: cli ; DISABLE INTERRUPTS or byte [KB_FLAG_2], KB_FE ; INDICATE RESEND RECEIVED ;jmp K26 ; RETURN IF NOT ACK RETURNED FOR DATA) ; 12/04/2021 jmp short ID_EX ; K26 ; ;----- UPDATE MODE INDICATORS IF CHANGE IN STATE KB_INT_2: ;push ax ; SAVE DATA IN ; 12/04/2021 push eax call MAKE_LED ; GO GET MODE INDICATOR DATA BYTE mov bl, [KB_FLAG_2] ; GET PREVIOUS BITS xor bl, al ; SEE IF ANY DIFFERENT and bl, KB_LEDS ; ISOLATE INDICATOR BITS jz short UP0 ; IF NO CHANGE BYPASS UPDATE call SND_LED ; GO TURN ON MODE INDICATORS UP0: ;pop ax ; RESTORE DATA IN ; 12/04/2021 pop eax ;------------------------------------------------------------------------ ; START OF KEY PROCESSING ; ;------------------------------------------------------------------------ mov ah, al ; SAVE SCAN CODE IN AH ALSO ; ;----- TEST FOR OVERRUN SCAN CODE FROM KEYBOARD cmp al, KB_OVER_RUN ; IS THIS AN OVERRUN CHAR ;je K62 ; BUFFER_FULL_BEEP ; 12/04/2021 jne short K16 jmp K62 K16: mov bh, [KB_FLAG_3] ; LOAD FLAGS FOR TESTING ; ;----- TEST TO SEE IF A READ_ID IS IN PROGRESS test bh, RD_ID+LC_AB ; ARE WE DOING A READ ID? jz short NOT_ID ; CONTINUE IF NOT jns short TST_ID_2 ; IS THE RD_ID FLAG ON? cmp al, ID_1 ; IS THIS THE 1ST ID CHARACTER? jne short RST_RD_ID or byte [KB_FLAG_3], LC_AB ; INDICATE 1ST ID WAS OK RST_RD_ID: and byte [KB_FLAG_3], ~RD_ID ; RESET THE READ ID FLAG jmp short ID_EX ; AND EXIT ; 12/04/2021 ;jmp K26 ; TST_ID_2: and byte [KB_FLAG_3], ~LC_AB ; RESET FLAG cmp al, ID_2A ; IS THIS THE 2ND ID CHARACTER? je short KX_BIT ; JUMP IF SO cmp al, ID_2 ; IS THIS THE 2ND ID CHARACTER? jne short ID_EX ; LEAVE IF NOT ; 12/04/2021 ;jne K26 ; ;----- A READ ID SAID THAT IT WAS ENHANCED KEYBOARD test bh, SET_NUM_LK ; SHOULD WE SET NUM LOCK? jz short KX_BIT ; EXIT IF NOT or byte [KB_FLAG], NUM_STATE ; FORCE NUM LOCK ON call SND_LED ; GO SET THE NUM LOCK INDICATOR KX_BIT: or byte [KB_FLAG_3], KBX ; INDICATE ENHANCED KEYBOARD WAS FOUND ID_EX: jmp K26 ; EXIT ; NOT_ID: cmp al, MC_E0 ; IS THIS THE GENERAL MARKER CODE? jne short TEST_E1 or byte [KB_FLAG_3], LC_E0+KBX ; SET FLAG BIT, SET KBX, AND jmp short EXIT ; THROW AWAY THIS CODE ; 12/04/2021 ;jmp K26A TEST_E1: cmp al, MC_E1 ; IS THIS THE PAUSE KEY? jne short NOT_HC or byte [KB_FLAG_3], LC_E1+KBX ; SET FLAG BIT, SET KBX, AND EXIT: jmp K26A ; THROW AWAY THIS CODE ; NOT_HC: and al, 07Fh ; TURN OFF THE BREAK BIT test bh, LC_E0 ; LAST CODE THE E0 MARKER CODE jz short NOT_LC_E0 ; JUMP IF NOT ; mov edi, _K6+6 ; IS THIS A SHIFT KEY? scasb ;je K26 ; K16B ; YES, THROW AWAY & RESET FLAG ; 12/04/2021 je short K16B ; K26 scasb jne short K16A ; NO, CONTINUE KEY PROCESSING ;jmp short K16B ; YES, THROW AWAY & RESET FLAG jmp K26 ; NOT_LC_E0: test bh, LC_E1 ; LAST CODE THE E1 MARKER CODE? jz short T_SYS_KEY ; JUMP IF NOT mov ecx, 4 ; LENGHT OF SEARCH mov edi, _K6+4 ; IS THIS AN ALT, CTL, OR SHIFT? repne scasb ; CHECK IT je short EXIT ; THROW AWAY IF SO ; 12/04/2021 ;je K26A ; cmp al, NUM_KEY ; IS IT THE PAUSE KEY? jne short K16B ; NO, THROW AWAY & RESET FLAG ; 12/04/2021 ;jne K26 test ah, 80h ; YES, IS IT THE BREAK OF THE KEY? jnz short K16B ; YES, THROW THIS AWAY, TOO ; 24/07/2022 ;jnz K26 ; 20/02/2015 test byte [KB_FLAG_1],HOLD_STATE ; NO, ARE WE PAUSED ALREADY? jnz short K16B ; YES, THROW AWAY ; 12/04/2021 ;jnz K26 jmp K39P ; NO, THIS IS THE REAL PAUSE STATE ; ;----- TEST FOR SYSTEM KEY T_SYS_KEY: cmp al, SYS_KEY ; IS IT THE SYSTEM KEY? jnz short K16A ; CONTINUE IF NOT ; test ah, 80h ; CHECK IF THIS A BREAK CODE jnz short K16C ; DO NOT TOUCH SYSTEM INDICATOR IF TRUE ; test byte [KB_FLAG_1], SYS_SHIFT ; SEE IF IN SYSTEM KEY HELD DOWN jnz short K16B ; IF YES, DO NOT PROCESS SYSTEM INDICATOR ; 12/04/2021 ;jnz K26 ; or byte [KB_FLAG_1], SYS_SHIFT ; INDICATE SYSTEM KEY DEPRESSED mov al, EOI ; END OF INTERRUPT COMMAND out 20h, al ;out INTA00, al ; SEND COMMAND TO INTERRUPT CONTROL PORT ; INTERRUPT-RETURN-NO-EOI mov al, ENA_KBD ; INSURE KEYBOARD IS ENABLED call SHIP_IT ; EXECUTE ENABLE ; !!! SYSREQ !!! function/system call (INTERRUPT) must be here !!! ;MOV AL, 8500H ; FUNCTION VALUE FOR MAKE OF SYSTEM KEY ;STI ; MAKE SURE INTERRUPTS ENABLED ;INT 15H ; USER INTERRUPT jmp K27A ; END PROCESSING ; K16B: jmp K26 ; IGNORE SYSTEM KEY ; K16C: and byte [KB_FLAG_1], ~SYS_SHIFT ; TURN OFF SHIFT KEY HELD DOWN mov al, EOI ; END OF INTERRUPT COMMAND out 20h, al ;out INTA00, al ; SEND COMMAND TO INTERRUPT CONTROL PORT ; INTERRUPT-RETURN-NO-EOI ;MOV AL, ENA_KBD ; INSURE KEYBOARD IS ENABLED ;CALL SHIP_IT ; EXECUTE ENABLE ; ;MOV AX, 8501H ; FUNCTION VALUE FOR BREAK OF SYSTEM KEY ;STI ; MAKE SURE INTERRUPTS ENABLED ;INT 15H ; USER INTERRUPT ;JMP K27A ; INGONRE SYSTEM KEY ; jmp K27 ; IGNORE SYSTEM KEY ; ;----- TEST FOR SHIFT KEYS K16A: mov bl, [KB_FLAG] ; PUT STATE FLAGS IN BL mov edi, _K6 ; SHIFT KEY TABLE offset mov ecx, _K6L ; LENGTH repne scasb ; LOOK THROUGH THE TABLE FOR A MATCH mov al, ah ; RECOVER SCAN CODE ;jne K25 ; IF NO MATCH, THEN SHIFT NOT FOUND ; 12/04/2021 je short K17 jmp K25 ; ;------ SHIFT KEY FOUND K17: sub edi, _K6+1 ; ADJUST PTR TO SCAN CODE MATCH mov ah, [edi+_K7] ; GET MASK INTO AH mov cl, 2 ; SETUP COUNT FOR FLAG SHIFTS test al, 80h ; TEST FOR BREAK KEY ;jnz short K23 ; JUMP OF BREAK ; 12/04/2021 jz short K17C jmp K23 ; ;----- SHIFT MAKE FOUND, DETERMINE SET OR TOGGLE K17C: cmp ah, SCROLL_SHIFT jae short K18 ; IF SCROLL SHIFT OR ABOVE, TOGGLE KEY ; ;----- PLAIN SHIFT KEY, SET SHIFT ON or [KB_FLAG], ah ; TURN ON SHIFT BIT test al, CTL_SHIFT+ALT_SHIFT ; IS IT ALT OR CTRL? ;;jnz short K17D ; YES, MORE FLAGS TO SET ;jz K26 ; NO, INTERRUPT RETURN ; 12/04/2021 jz short k17f K17D: test bh, LC_E0 ; IS THIS ONE OF NEW KEYS? jz short K17E ; NO, JUMP or [KB_FLAG_3], ah ; SET BITS FOR RIGHT CTRL, ALT ;jmp K26 ; INTERRUPT RETURN ; 12/04/2021 jmp short k17f K17E: shr ah, cl ; MOVE FLAG BITS TWO POSITIONS or [KB_FLAG_1], ah ; SET BITS FOR LEFT CTRL, ALT k17f: ; 12/04/2021 jmp K26 ; ;----- TOGGLED SHIFT KEY, TEST FOR 1ST MAKE OR NOT K18: ; SHIFT-TOGGLE test bl, CTL_SHIFT ; CHECK CTL SHIFT STATE jz short K18A ; JUMP IF NOT CTL STATE ;jnz K25 ; JUMP IF CTL STATE ; 12/04/2021 jmp short k20a ; K25 K18A: cmp al, INS_KEY ; CHECK FOR INSERT KEY jne short K22 ; JUMP IF NOT INSERT KEY test bl, ALT_SHIFT ; CHECK FOR ALTERNATE SHIFT jz short K18B ; JUMP IF NOT ALTERNATE SHIFT ;jnz K25 ; JUMP IF ALTERNATE SHIFT ; 12/04/2021 jmp short k20a ; K25 K18B: test bh, LC_E0 ;20/02/2015 ; IS THIS NEW INSERT KEY? jnz short K22 ; YES, THIS ONE'S NEVER A '0' K19: test bl, NUM_STATE ; CHECK FOR BASE STATE jnz short K21 ; JUMP IF NUM LOCK IS ON test bl, LEFT_SHIFT+RIGHT_SHIFT ; TEST FOR SHIFT STATE jz short K22 ; JUMP IF BASE STATE K20: ; NUMERIC ZERO, NOT INSERT KEY mov ah, al ; PUT SCAN CODE BACK IN AH k20a: ; 12/04/2021 jmp K25 ; NUMERAL '0', STNDRD. PROCESSING K21: ; MIGHT BE NUMERIC test bl, LEFT_SHIFT+RIGHT_SHIFT jz short K20 ; IS NUMERIC, STD. PROC. ; K22: ; SHIFT TOGGLE KEY HIT; PROCESS IT test ah, [KB_FLAG_1] ; IS KEY ALREADY DEPRESSED ;jnz short K26 ; JUMP IF KEY ALREADY DEPRESSED ; 12/04/2021 jnz short k17f ; K26 K22A: or [KB_FLAG_1], ah ; INDICATE THAT THE KEY IS DEPRESSED xor [KB_FLAG], ah ; TOGGLE THE SHIFT STATE ; ;----- TOGGLE LED IF CAPS, NUM OR SCROLL KEY DEPRESSED test ah, CAPS_SHIFT+NUM_SHIFT+SCROLL_SHIFT ; SHIFT TOGGLE? jz short K22B ; GO IF NOT ; ; 12/04/2021 (32 bit push/pop) push eax ; push ax ; SAVE SCAN CODE AND SHIFT MASK call SND_LED ; GO TURN MODE INDICATORS ON pop eax ; pop ax ; RESTORE SCAN CODE K22B: cmp al, INS_KEY ; TEST FOR 1ST MAKE OF INSERT KEY ;jne short K26 ; JUMP IF NOT INSERT KEY ; 12/04/2021 jne short k17f ; K26 mov ah, al ; SCAN CODE IN BOTH HALVES OF AX jmp K28 ; FLAGS UPDATED, PROC. FOR BUFFER ; ;----- BREAK SHIFT FOUND K23: ; BREAK-SHIFT-FOUND cmp ah, SCROLL_SHIFT ; IS THIS A TOGGLE KEY not ah ; INVERT MASK jae short K24 ; YES, HANDLE BREAK TOGGLE and [KB_FLAG], ah ; TURN OFF SHIFT BIT cmp ah, ~CTL_SHIFT ; IS THIS ALT OR CTL? ja short K23D ; NO, ALL DONE ; test bh, LC_E0 ; 2ND ALT OR CTL? jz short K23A ; NO, HANSLE NORMALLY and [KB_FLAG_3], ah ; RESET BIT FOR RIGHT ALT OR CTL jmp short K23B ; CONTINUE K23A: sar ah, cl ; MOVE THE MASK BIT TWO POSITIONS and [KB_FLAG_1], ah ; RESET BIT FOR LEFT ALT AND CTL K23B: mov ah, al ; SAVE SCAN CODE mov al, [KB_FLAG_3] ; GET RIGHT ALT & CTRL FLAGS shr al, cl ; MOVE TO BITS 1 & 0 or al, [KB_FLAG_1] ; PUT IN LEFT ALÞT & CTL FLAGS shl al, cl ; MOVE BACK TO BITS 3 & 2 and al, ALT_SHIFT+CTL_SHIFT ; FILTER OUT OTHER GARBAGE or [KB_FLAG], al ; PUT RESULT IN THE REAL FLAGS mov al, ah K23D: cmp al, ALT_KEY+80h ; IS THIS ALTERNATE SHIFT RELEASE jne short K26 ; INTERRUPT RETURN ; ;----- ALTERNATE SHIFT KEY RELEASED, GET THE VALUE INTO BUFFER mov al, [ALT_INPUT] mov ah, 0 ; SCAN CODE OF 0 mov [ALT_INPUT], ah ; ZERO OUT THE FIELD cmp al, 0 ; WAS THE INPUT = 0? je short K26 ; INTERRUPT_RETURN ; 29/01/2016 ;jmp K61 ; IT WASN'T, SO PUT IN BUFFER jmp _K60 ; K24: ; BREAK-TOGGLE and [KB_FLAG_1], ah ; INDICATE NO LONGER DEPRESSED jmp short K26 ; INTERRUPT_RETURN ; ;----- TEST FOR HOLD STATE ; AL, AH = SCAN CODE K25: ; NO-SHIFT-FOUND cmp al, 80h ; TEST FOR BREAK KEY jae short K26 ; NOTHING FOR BREAK CHARS FROM HERE ON test byte [KB_FLAG_1], HOLD_STATE ; ARE WE IN HOLD STATE jz short K28 ; BRANCH AROUND TEST IF NOT cmp al, NUM_KEY je short K26 ; CAN'T END HOLD ON NUM_LOCK and byte [KB_FLAG_1], ~HOLD_STATE ; TURN OFF THE HOLD STATE BIT K26: and byte [KB_FLAG_3], ~(LC_E0+LC_E1) ; RESET LAST CHAR H.C. FLAG K26A: ; INTERRUPT-RETURN cli ; TURN OFF INTERRUPTS mov al, EOI ; END OF INTERRUPT COMMAND out 20h, al ;out INTA00, al ; SEND COMMAND TO INTERRUPT CONTROL PORT K27: ; INTERRUPT-RETURN-NO-EOI mov al, ENA_KBD ; INSURE KEYBOARD IS ENABLED call SHIP_IT ; EXECUTE ENABLE K27A: cli ; DISABLE INTERRUPTS ;;mov byte [intflg], 0 ; 07/01/2017 ;; 15/01/2017 pop es ; RESTORE REGISTERS pop ds pop edi pop esi pop edx pop ecx pop ebx pop eax ;pop ebp iretd ; RETURN ;----- NOT IN HOLD STATE K28: ; NO-HOLD-STATE cmp al, 88 ; TEST FOR OUT-OF-RANGE SCAN CODES ja short K26 ; IGNORE IF OUT-OF-RANGE ; test bl, ALT_SHIFT ; ARE WE IN ALTERNATE SHIFT jz short K28A ; IF NOT ALTERNATE ; 12/04/2021 ;jz K38 ; test bh, KBX ; IS THIS THE ENCHANCED KEYBOARD? jz short K29 ; NO, ALT STATE IS REAL ;28/02/2015 test byte [KB_FLAG_1], SYS_SHIFT ; YES, IS SYSREQ KEY DOWN? jz short K29 ; NO, ALT STATE IS REAL ; 12/04/2021 ;jnz K38 ; YES, THIS IS PHONY ALT STATE ; ; DUE TO PRESSING SYSREQ K28A: jmp K38 ; ;----- TEST FOR RESET KEY SEQUENCE (CTL ALT DEL) K29: ; TEST-RESET test bl, CTL_SHIFT ; ARE WE IN CONTROL SHIFT ALSO? jz short K31 ; NO_RESET cmp al, DEL_KEY ; CTL-ALT STATE, TEST FOR DELETE KEY jne short K31 ; NO_RESET, IGNORE ; ;----- CTL-ALT-DEL HAS BEEN FOUND ; 26/08/2014 cpu_reset: ; IBM PC/AT ROM BIOS source code - 10/06/85 (TEST4.ASM - PROC_SHUTDOWN) ; Send FEh (system reset command) to the keyboard controller. mov al, SHUT_CMD ; SHUTDOWN COMMAND out STATUS_PORT, al ; SEND TO KEYBOARD CONTROL PORT khere: hlt ; WAIT FOR 80286 RESET jmp short khere ; INSURE HALT ; ;----- IN ALTERNATE SHIFT, RESET NOT FOUND K31: ; NO-RESET cmp al, 57 ; TEST FOR SPACE KEY jne short K311 ; NOT THERE mov al, ' ' ; SET SPACE CHAR k31a: ; 12/04/2021 jmp K57 ; BUFFER_FILL K311: cmp al, 15 ; TEST FOR TAB KEY jne short K312 ; NOT THERE mov ax, 0A500h ; SET SPECIAL CODE FOR ALT-TAB ;jmp K57 ; BUFFER_FILL ; 12/04/2021 jmp short k31a K312: cmp al, 74 ; TEST FOR KEY PAD - ;je short K37B ; GO PROCESS ; 12/04/2021 je short k312a cmp al, 78 ; TEST FOR KEY PAD + ;je short K37B ; GO PROCESS ; 12/04/2021 jne short K32 k312a: jmp K37B ; ;----- LOOK FOR KEY PAD ENTRY K32: ; ALT-KEY-PAD mov edi, K30 ; ALT-INPUT-TABLE offset mov ecx, 10 ; LOOK FOR ENTRY USING KEYPAD repne scasb ; LOOK FOR MATCH jne short K33 ; NO_ALT_KEYPAD test bh, LC_E0 ; IS THIS ONE OF THE NEW KEYS? jnz short K37C ; YES, JUMP, NOT NUMPAD KEY sub edi, K30+1 ; DI NOW HAS ENTRY VALUE mov al, [ALT_INPUT] ; GET THE CURRENT BYTE mov ah, 10 ; MULTIPLY BY 10 mul ah add ax, di ; ADD IN THE LATEST ENTRY mov [ALT_INPUT], al ; STORE IT AWAY K32A: jmp K26 ; THROW AWAY THAT KEYSTROKE ; ;----- LOOK FOR SUPERSHIFT ENTRY K33: ; NO-ALT-KEYPAD mov byte [ALT_INPUT], 0 ; ZERO ANY PREVIOUS ENTRY INTO INPUT mov ecx, 26 ; (DI),(ES) ALREADY POINTING repne scasb ; LOOK FOR MATCH IN ALPHABET je short K37A ; MATCH FOUND, GO FILLL THE BUFFER ; ;----- LOOK FOR TOP ROW OF ALTERNATE SHIFT K34: ; ALT-TOP-ROW cmp al, 2 ; KEY WITH '1' ON IT jb short K37B ; MUST BE ESCAPE cmp al, 13 ; IS IT IN THE REGION ja short K35 ; NO, ALT SOMETHING ELSE add ah, 118 ; CONVERT PSEUDO SCAN CODE TO RANGE jmp short K37A ; GO FILL THE BUFFER ; ;----- TRANSLATE ALTERNATE SHIFT PSEUDO SCAN CODES K35: ; ALT-FUNCTION cmp al, F11_M ; IS IT F11? jb short K35A ; 20/02/2015 ; NO, BRANCH cmp al, F12_M ; IS IT F12? ja short K35A ; 20/02/2015 ; NO, BRANCH add ah, 52 ; CONVERT TO PSEUDO SCAN CODE jmp short K37A ; GO FILL THE BUFFER K35A: test bh, LC_E0 ; DO WE HAVE ONE OF THE NEW KEYS? jz short K37 ; NO, JUMP cmp al, 28 ; TEST FOR KEYPAD ENTER jne short K35B ; NOT THERE mov ax, 0A600h ; SPECIAL CODE ;jmp K57 ; BUFFER FILL ; 12/04/2021 jmp short k35c K35B: cmp al, 83 ; TEST FOR DELETE KEY je short K37C ; HANDLE WITH OTHER EDIT KEYS cmp al, 53 ; TEST FOR KEYPAD / jne short K32A ; NOT THERE, NO OTHER E0 SPECIALS ; 12/04/2021 ;jne K26 mov ax, 0A400h ; SPECIAL CODE1 k35c: ; 12/04/2021 jmp K57 ; BUFFER FILL K37: cmp al, 59 ; TEST FOR FUNCTION KEYS (F1) jb short K37B ; NO FN, HANDLE W/OTHER EXTENDED cmp al, 68 ; IN KEYPAD REGION? ja short K32A ; IF SO, IGNORE ; 12/04/2021 ;ja K26 add ah, 45 ; CONVERT TO PSEUDO SCAN CODE K37A: mov al, 0 ; ASCII CODE OF ZERO ;jmp K57 ; PUT IT IN THE BUFFER ; 12/04/2021 jmp short k35c K37B: mov al, 0F0h ; USE SPECIAL ASCII CODE ;jmp K57 ; PUT IT IN THE BUFFER ; 12/04/2021 jmp short k35c K37C: add al, 80 ; CONVERT SCAN CODE (EDIT KEYS) mov ah, al ; (SCAN CODE NOT IN AH FOR INSERT) jmp short K37A ; PUT IT IN THE BUFFER ; ;----- NOT IN ALTERNATE SHIFT K38: ; NOT-ALT-SHIFT ; BL STILL HAS SHIFT FLAGS test bl, CTL_SHIFT ; ARE WE IN CONTROL SHIFT? ;;jnz short K38A ; YES, START PROCESSING ;jz K44 ; NOT-CTL-SHIFT ; 12/04/2021 jnz short K38A ; YES, START PROCESSING jmp K44 ; NOT-CTL-SHIFT ; ;----- CONTROL SHIFT, TEST SPECIAL CHARACTERS ;----- TEST FOR BREAK K38A: cmp al, SCROLL_KEY ; TEST FOR BREAK jne short K39 ; JUMP, NO-BREAK test bh, KBX ; IS THIS THE ENHANCED KEYBOARD? jz short K38B ; NO, BREAK IS VALID test bh, LC_E0 ; YES, WAS LAST CODE AN E0? jz short K39 ; NO-BREAK, TEST FOR PAUSE K38B: mov ebx, [BUFFER_HEAD] ; RESET BUFFER TO EMPTY mov [BUFFER_TAIL], ebx mov byte [BIOS_BREAK], 80h ; TURN ON BIOS_BREAK BIT ; ;----- ENABLE KEYBOARD mov al, ENA_KBD ; ENABLE KEYBOARD call SHIP_IT ; EXECUTE ENABLE ; ; CTRL+BREAK code here !!! ;INT 1BH ; BREAK INTERRUPT VECTOR ; 17/10/2015 call ctrlbrk ; control+break subroutine ; ;sub ax, ax ; PUT OUT DUMMY CHARACTER ; 12/04/2021 sub eax, eax jmp K57 ; BUFFER_FILL ; ;----- TEST FOR PAUSE K39: ; NO_BREAK test bh, KBX ; IS THIS THE ENHANCED KEYBOARD? jnz short K41 ; YES, THEN THIS CAN'T BE PAUSE cmp al, NUM_KEY ; LOOK FOR PAUSE KEY jne short K41 ; NO-PAUSE K39P: or byte [KB_FLAG_1], HOLD_STATE ; TURN ON THE HOLD FLAG ; ;----- ENABLE KEYBOARD mov al, ENA_KBD ; ENABLE KEYBOARD call SHIP_IT ; EXECUTE ENABLE K39A: mov al, EOI ; END OF INTERRUPT TO CONTROL PORT out 20h, al ;out INTA00, al ; ALLOW FURTHER KEYSTROKE INTERRUPTS ; ;----- DURING PAUSE INTERVAL, TURN COLOR CRT BACK ON cmp byte [CRT_MODE], 7 ; IS THIS BLACK AND WHITE CARD je short K40 ; YES, NOTHING TO DO mov dx, 03D8h ; PORT FOR COLOR CARD mov al, [CRT_MODE_SET] ; GET THE VALUE OF THE CURRENT MODE out dx, al ; SET THE CRT MODE, SO THAT CRT IS ON ; K40: ; PAUSE-LOOP test byte [KB_FLAG_1], HOLD_STATE ; CHECK HOLD STATE FLAG jnz short K40 ; LOOP UNTIL FLAG TURNED OFF ; jmp K27 ; INTERRUPT_RETURN_NO_EOI ; ;----- TEST SPECIAL CASE KEY 55 K41: ; NO-PAUSE cmp al, 55 ; TEST FOR */PRTSC KEY jne short K42 ; NOT-KEY-55 test bh, KBX ; IS THIS THE ENHANCED KEYBOARD? jz short K41A ; NO, CTL-PRTSC IS VALID test bh, LC_E0 ; YES, WAS LAST CODE AN E0? jz short K42B ; NO, TRANSLATE TO A FUNCTION K41A: mov ax, 114*256 ; START/STOP PRINTING SWITCH jmp K57 ; BUFFER_FILL ; ;----- SET UP TO TRANSLATE CONTROL SHIFT K42: ; NOT-KEY-55 cmp al, 15 ; IS IT THE TAB KEY? je short K42B ; YES, XLATE TO FUNCTION CODE cmp al, 53 ; IS IT THE / KEY? jne short K42A ; NO, NO MORE SPECIAL CASES test bh, LC_E0 ; YES, IS IT FROM THE KEY PAD? jz short K42A ; NO, JUST TRANSLATE mov ax, 9500h ; YES, SPECIAL CODE FOR THIS ONE jmp K57 ; BUFFER FILL K42A: ;;mov ebx, _K8 ; SET UP TO TRANSLATE CTL cmp al, 59 ; IS IT IN CHARACTER TABLE? ;jb short K45F ; YES, GO TRANSLATE CHAR ;;jb K56 ; 20/02/2015 ;;jmp K64 ; 20/02/2015 K42B: mov ebx, _K8 ; SET UP TO TRANSLATE CTL ;jb K56 ;; 20/02/2015 ; 12/04/2021 jb short K45F jmp K64 ; ;----- NOT IN CONTROL SHIFT K44: ; NOT-CTL-SHIFT cmp al, 55 ; PRINT SCREEN KEY? jne short K45 ; NOT PRINT SCREEN test bh, KBX ; IS THIS ENHANCED KEYBOARD? jz short K44A ; NO, TEST FOR SHIFT STATE test bh, LC_E0 ; YES, LAST CODE A MARKER? jnz short K44B ; YES, IS PRINT SCREEN jmp short K45C ; NO, TRANSLATE TO '*' CHARACTER K44A: test bl, LEFT_SHIFT+RIGHT_SHIFT ; NOT 101 KBD, SHIFT KEY DOWN? jz short K45C ; NO, TRANSLATE TO '*' CHARACTER ; ;----- ISSUE INTERRUPT TO INDICATE PRINT SCREEN FUNCTION K44B: mov al, ENA_KBD ; INSURE KEYBOARD IS ENABLED call SHIP_IT ; EXECUTE ENABLE mov al, EOI ; END OF CURRENT INTERRUPT out 20h, al ;out INTA00, al ; SO FURTHER THINGS CAN HAPPEN ; Print Screen !!! ; ISSUE PRINT SCREEN INTERRUPT (INT 05h) ;PUSH BP ; SAVE POINTER ;INT 5H ; ISSUE PRINT SCREEN INTERRUPT ;POP BP ; RESTORE POINTER and byte [KB_FLAG_3], ~(LC_E0+LC_E1) ; ZERO OUT THESE FLAGS jmp K27 ; GO BACK WITHOUT EOI OCCURRING ; ;----- HANDLE IN-CORE KEYS K45: ; NOT-PRINT-SCREEN cmp al, 58 ; TEST FOR IN-CORE AREA ja short K46 ; JUMP IF NOT cmp al, 53 ; IS THIS THE '/' KEY? jne short K45A ; NO, JUMP test bh, LC_E0 ; WAS THE LAST CODE THE MARKER? jnz short K45C ; YES, TRANSLATE TO CHARACTER K45A: mov ecx, 26 ; LENGHT OF SEARCH mov edi, K30+10 ; POINT TO TABLE OF A-Z CHARS repne scasb ; IS THIS A LETTER KEY? ; 20/02/2015 jne short K45B ; NO, SYMBOL KEY ; test bl, CAPS_STATE ; ARE WE IN CAPS_LOCK? jnz short K45D ; TEST FOR SURE K45B: test bl, LEFT_SHIFT+RIGHT_SHIFT ; ARE WE IN SHIFT STATE? jnz short K45E ; YES, UPPERCASE ; NO, LOWERCASE K45C: mov ebx, K10 ; TRANSLATE TO LOWERCASE LETTERS jmp short K56 K45D: ; ALMOST-CAPS-STATE test bl, LEFT_SHIFT+RIGHT_SHIFT ; CL ON. IS SHIFT ON, TOO? jnz short K45C ; SHIFTED TEMP OUT OF CAPS STATE K45E: mov ebx, K11 ; TRANSLATE TO UPPER CASE LETTERS K45F: jmp short K56 ; ;----- TEST FOR KEYS F1 - F10 K46: ; NOT IN-CORE AREA cmp al, 68 ; TEST FOR F1 - F10 ;ja short K47 ; JUMP IF NOT ;jmp short K53 ; YES, GO DO FN KEY PROCESS jna short K53 ; ;----- HANDLE THE NUMERIC PAD KEYS K47: ; NOT F1 - F10 cmp al, 83 ; TEST NUMPAD KEYS ja short K52 ; JUMP IF NOT ; ;----- KEYPAD KEYS, MUST TEST NUM LOCK FOR DETERMINATION K48: cmp al, 74 ; SPECIAL CASE FOR MINUS je short K45E ; GO TRANSLATE cmp al, 78 ; SPECIAL CASE FOR PLUS je short K45E ; GO TRANSLATE test bh, LC_E0 ; IS THIS ONE OFTHE NEW KEYS? jnz short K49 ; YES, TRANSLATE TO BASE STATE ; test bl, NUM_STATE ; ARE WE IN NUM LOCK jnz short K50 ; TEST FOR SURE test bl, LEFT_SHIFT+RIGHT_SHIFT ; ARE WE IN SHIFT STATE? ;jnz short K51 ; IF SHIFTED, REALLY NUM STATE jnz short K45E ; ;----- BASE CASE FOR KEYPAD K49: cmp al, 76 ; SPECIAL CASE FOR BASE STATE 5 jne short K49A ; CONTINUE IF NOT KEYPAD 5 mov al, 0F0h ; SPECIAL ASCII CODE jmp short K57 ; BUFFER FILL K49A: mov ebx, K10 ; BASE CASE TABLE jmp short K64 ; CONVERT TO PSEUDO SCAN ; ;----- MIGHT BE NUM LOCK, TEST SHIFT STATUS K50: ; ALMOST-NUM-STATE test bl, LEFT_SHIFT+RIGHT_SHIFT jnz short K49 ; SHIFTED TEMP OUT OF NUM STATE K51: jmp short K45E ; REALLY NUM STATE ; ;----- TEST FOR THE NEW KEYS ON WT KEYBOARDS K52: ; NOT A NUMPAD KEY cmp al, 86 ; IS IT THE NEW WT KEY? ;jne short K53 ; JUMP IF NOT ;jmp short K45B ; HANDLE WITH REST OF LETTER KEYS je short K45B ; ;----- MUST BE F11 OR F12 K53: ; F1 - F10 COME HERE, TOO test bl, LEFT_SHIFT+RIGHT_SHIFT ; TEST SHIFT STATE jz short K49 ; JUMP, LOWER CASE PSEUDO SC'S ; 20/02/2015 mov ebx, K11 ; UPPER CASE PSEUDO SCAN CODES jmp short K64 ; TRANSLATE SCAN ; ;----- TRANSLATE THE CHARACTER K56: ; TRANSLATE-CHAR dec al ; CONVERT ORIGIN xlat ; CONVERT THE SCAN CODE TO ASCII test byte [KB_FLAG_3], LC_E0 ; IS THIS A NEW KEY? jz short K57 ; NO, GO FILL BUFFER mov ah, MC_E0 ; YES, PUT SPECIAL MARKER IN AH jmp short K57 ; PUT IT INTO THE BUFFER ; ;----- TRANSLATE SCAN FOR PSEUDO SCAN CODES K64: ; TRANSLATE-SCAN-ORGD dec al ; CONVERT ORIGIN xlat ; CTL TABLE SCAN mov ah, al ; PUT VALUE INTO AH mov al, 0 ; ZERO ASCII CODE test byte [KB_FLAG_3], LC_E0 ; IS THIS A NEW KEY? jz short K57 ; NO, GO FILL BUFFER mov al, MC_E0 ; YES, PUT SPECIAL MARKER IN AL ; ;----- PUT CHARACTER INTO BUFFER K57: ; BUFFER_FILL cmp al, -1 ; IS THIS AN IGNORE CHAR je short K59 ; YES, DO NOTHING WITH IT ;je K26 ; YES, DO NOTHING WITH IT cmp ah, -1 ; LOOK FOR -1 PSEUDO SCAN ;;jne short K61 ; NEAR_INTERRUPT_RETURN ;je K26 ; INTERRUPT_RETURN ; 12/04/2021 jne short _K60 ; NEAR_INTERRUPT_RETURN K59: ; NEAR_INTERRUPT_RETURN jmp K26 ; INTERRUPT_RETURN _K60: ; 29/01/2016 cmp ah, 68h ; ALT + F1 key jb short K61 cmp ah, 6Fh ; ALT + F8 key ja short K61 ; mov bl, [ACTIVE_PAGE] add bl, 68h cmp bl, ah je short K61 ; 24/07/2022 ;push ax push eax mov al, ah sub al, 68h call set_active_page pop eax ;pop ax K61: ; NOT-CAPS-STATE mov ebx, [BUFFER_TAIL] ; GET THE END POINTER TO THE BUFFER mov esi, ebx ; SAVE THE VALUE call _K4 ; ADVANCE THE TAIL cmp ebx, [BUFFER_HEAD] ; HAS THE BUFFER WRAPPED AROUND je short K62 ; BUFFER_FULL_BEEP mov [esi], ax ; STORE THE VALUE mov [BUFFER_TAIL], ebx ; MOVE THE POINTER UP jmp K26 ;;cli ; TURN OFF INTERRUPTS ;;mov al, EOI ; END OF INTERRUPT COMMAND ;;out INTA00, al ; SEND COMMAND TO INTERRUPT CONTROL PORT ;mov al, ENA_KBD ; INSURE KEYBOARD IS ENABLED ;call SHIP_IT ; EXECUTE ENABLE ;mov ax, 9102h ; MOVE IN POST CODE & TYPE ;int 15h ; PERFORM OTHER FUNCTION ;;and byte [KB_FLAG_3],~(LC_E0+LC_E1) ; RESET LAST CHAR H.C. FLAG ;jmp K27A ; INTERRUPT_RETURN ;;jmp K27 ; ;----- BUFFER IS FULL SOUND THE BEEPER K62: mov al, EOI ; ENABLE INTERRUPT CONTROLLER CHIP out INTA00, al mov cx, 678 ; DIVISOR FOR 1760 HZ mov bl, 4 ; SHORT BEEP COUNT (1/16 + 1/64 DELAY) call beep ; GO TO COMMON BEEP HANDLER jmp K27 ; EXIT SHIP_IT: ;--------------------------------------------------------------------------------- ; SHIP_IT ; THIS ROUTINES HANDLES TRANSMISSION OF COMMAND AND DATA BYTES ; TO THE KEYBOARD CONTROLLER. ;--------------------------------------------------------------------------------- ; ;push ax ; SAVE DATA TO SEND ; 12/04/2021 push eax ;----- WAIT FOR COMMAND TO ACCEPTED cli ; DISABLE INTERRUPTS TILL DATA SENT ; xor ecx, ecx ; CLEAR TIMEOUT COUNTER mov ecx, 10000h S10: in al, STATUS_PORT ; READ KEYBOARD CONTROLLER STATUS test al, INPT_BUF_FULL ; CHECK FOR ITS INPUT BUFFER BUSY loopnz S10 ; WAIT FOR COMMAND TO BE ACCEPTED ;pop ax ; GET DATA TO SEND ; 12/04/2021 pop eax out STATUS_PORT, al ; SEND TO KEYBOARD CONTROLLER sti ; ENABLE INTERRUPTS AGAIN retn ; RETURN TO CALLER ; 12/04/2021 (32 bit push/pop) SND_DATA: ; --------------------------------------------------------------------------------- ; SND_DATA ; THIS ROUTINES HANDLES TRANSMISSION OF COMMAND AND DATA BYTES ; TO THE KEYBOARD AND RECEIPT OF ACKNOWLEDGEMENTS. IT ALSO ; HANDLES ANY RETRIES IF REQUIRED ; --------------------------------------------------------------------------------- ; push eax ; push ax ; SAVE REGISTERS push ebx ; push bx push ecx mov bh, al ; SAVE TRANSMITTED BYTE FOR RETRIES mov bl, 3 ; LOAD RETRY COUNT SD0: cli ; DISABLE INTERRUPTS and byte [KB_FLAG_2], ~(KB_FE+KB_FA) ; CLEAR ACK AND RESEND FLAGS ; ;----- WAIT FOR COMMAND TO BE ACCEPTED mov ecx, 10000h ; MAXIMUM WAIT COUNT SD5: in al, STATUS_PORT ; READ KEYBOARD PROCESSOR STATUS PORT test al, INPT_BUF_FULL ; CHECK FOR ANY PENDING COMMAND loopnz SD5 ; WAIT FOR COMMAND TO BE ACCEPTED ; mov al, bh ; REESTABLISH BYTE TO TRANSMIT out PORT_A, al ; SEND BYTE sti ; ENABLE INTERRUPTS ;mov cx, 01A00h ; LOAD COUNT FOR 10 ms+ mov ecx, 0FFFFh SD1: test byte [KB_FLAG_2], KB_FE+KB_FA ; SEE IF EITHER BIT SET jnz short SD3 ; IF SET, SOMETHING RECEIVED GO PROCESS loop SD1 ; OTHERWISE WAIT SD2: dec bl ; DECREMENT RETRY COUNT jnz short SD0 ; RETRY TRANSMISSION or byte [KB_FLAG_2], KB_ERR ; TURN ON TRANSMIT ERROR FLAG jmp short SD4 ; RETRIES EXHAUSTED FORGET TRANSMISSION SD3: test byte [KB_FLAG_2], KB_FA ; SEE IF THIS IS AN ACKNOWLEDGE jz short SD2 ; IF NOT, GO RESEND SD4: pop ecx ; RESTORE REGISTERS pop ebx ; pop bx pop eax ; pop ax retn ; RETURN, GOOD TRANSMISSION SND_LED: ; --------------------------------------------------------------------------------- ; SND_LED ; THIS ROUTINES TURNS ON THE MODE INDICATORS. ; ;---------------------------------------------------------------------------------- ; cli ; TURN OFF INTERRUPTS test byte [KB_FLAG_2], KB_PR_LED ; CHECK FOR MODE INDICATOR UPDATE jnz short SL1 ; DON'T UPDATE AGAIN IF UPDATE UNDERWAY ; or byte [KB_FLAG_2], KB_PR_LED ; TURN ON UPDATE IN PROCESS mov al, EOI ; END OF INTERRUPT COMMAND out 20h, al ;out INTA00, al ; SEND COMMAND TO INTERRUPT CONTROL PORT jmp short SL0 ; GO SEND MODE INDICATOR COMMAND SND_LED1: cli ; TURN OFF INTERRUPTS test byte [KB_FLAG_2], KB_PR_LED ; CHECK FOR MODE INDICATOR UPDATE jnz short SL1 ; DON'T UPDATE AGAIN IF UPDATE UNDERWAY ; or byte [KB_FLAG_2], KB_PR_LED ; TURN ON UPDATE IN PROCESS SL0: mov al, LED_CMD ; LED CMD BYTE call SND_DATA ; SEND DATA TO KEYBOARD cli call MAKE_LED ; GO FORM INDICATOR DATA BYTE and byte [KB_FLAG_2], 0F8h ; ~KB_LEDS ; CLEAR MODE INDICATOR BITS or [KB_FLAG_2], al ; SAVE PRESENT INDICATORS FOR NEXT TIME test byte [KB_FLAG_2], KB_ERR ; TRANSMIT ERROR DETECTED jnz short SL2 ; IF SO, BYPASS SECOND BYTE TRANSMISSION ; call SND_DATA ; SEND DATA TO KEYBOARD cli ; TURN OFF INTERRUPTS test byte [KB_FLAG_2], KB_ERR ; TRANSMIT ERROR DETECTED jz short SL3 ; IF NOT, DON'T SEND AN ENABLE COMMAND SL2: mov al, KB_ENABLE ; GET KEYBOARD CSA ENABLE COMMAND call SND_DATA ; SEND DATA TO KEYBOARD cli ; TURN OFF INTERRUPTS SL3: and byte [KB_FLAG_2], ~(KB_PR_LED+KB_ERR) ; TURN OFF MODE INDICATOR SL1: ; UPDATE AND TRANSMIT ERROR FLAG sti ; ENABLE INTERRUPTS retn ; RETURN TO CALLER MAKE_LED: ;--------------------------------------------------------------------------------- ; MAKE_LED ; THIS ROUTINES FORMS THE DATA BYTE NECESSARY TO TURN ON/OFF ; THE MODE INDICATORS. ;--------------------------------------------------------------------------------- ; ;push cx ; SAVE CX mov al, [KB_FLAG] ; GET CAPS & NUM LOCK INDICATORS and al, CAPS_STATE+NUM_STATE+SCROLL_STATE ; ISOLATE INDICATORS ;mov cl, 4 ; SHIFT COUNT ;rol al, cl ; SHIFT BITS OVER TO TURN ON INDICATORS rol al, 4 ; 20/02/2015 and al, 07h ; MAKE SURE ONLY MODE BITS ON ;pop cx retn ; RETURN TO CALLER ; % include 'kybdata.s' ; KEYBOARD DATA ; /// End Of KEYBOARD FUNCTIONS ///